BJ-130E White & Kraft Fiberglass Reinforced Water-Activated Tape

Información adicional

Backing

Kraft Paper

Adhesive

Starch Base

BJ-130E white and kraft fiberglass reinforced water-activated tape is designed for secure sealing of lightweight to average corrugated cartons up to 30 kg. Its reinforced construction combines a 40 g/m² white top paper ply, 35 g/m² kraft bottom ply, fiberglass reinforcement, and starch-based water-activated adhesive. With a total weight of 125 g/m² (-3g~+2g), 0.145 mm listed thickness, and machine-direction tensile strength of 238 N/25mm, BJ-130E provides a strong, tamper-evident paper sealing solution for shipping, warehousing, and transit packaging.

Social Media:

Product Description

BJ-130E Technical Specifications

Technical construction and performance data for BJ-130E reinforced paper gummed tape in white and kraft.

MODEL BJ-130E
PRODUCT TYPE Reinforced Paper Gummed Tape (White and Kraft)
RECOMMENDED APPLICATION Light Weight to Average Cartons Up to 30 kg
Material Construction
Backing Top Ply: 40 g/m2 White paper
Backing Bottom Ply: 35 g/m2 Kraft paper
Thread 72mm (1-1-1-1-1-1-1) Fiberglass
Water Activated Adhesive Starch adhesive
Glue Weight 25 g/m2 (-3g~+2g)
Total Weight 125 g/m2 (-3g~+2g) / 0.145mm
Tensile Performance
Property Direction Metric Imperial
Tensile Strength MD 238N/25mm 53.5lbs/in
TD 114N/25mm 25.6lbs/in
Storage Store in a dry place and avoid direct sunlight.
Application & Test Note The above performance values refer to average laboratory test results obtained from BAIJIN product samples. Users should independently test and verify product suitability for the intended carton and packaging application before large-volume use.

White Outside. Reinforced Inside.

BJ-130E white reinforced water-activated tape combines a white top paper ply, kraft bottom ply, fiberglass reinforcement and starch adhesive in one reinforced carton sealing structure.

The white outer surface provides a cleaner packaging appearance, while the internal reinforcement supports the tape against mechanical stresses during carton sealing, handling and transportation.

Recommended for Cartons Up to 30 kg The technical specification recommends BJ-130E for lightweight to average corrugated cartons weighing up to 30 kg.
GET A QUICK QUOTE →
WHITE & KRAFT REINFORCED BUILD

Hybrid Paper Construction with Fiberglass Support

40 g/m²
White Top Paper Ply Creates the visible white outer surface of the reinforced tape.
FIBERGLASS
Reinforcement Structure 72mm (1-1-1-1-1-1-1) fiberglass reinforcement as specified.
35 g/m²
Kraft Bottom Paper Ply Forms the lower paper layer of the reinforced tape construction.
238 N/25mm Machine-Direction Tensile Strength
114 N/25mm Transverse-Direction Tensile Strength
Up to 30 kg Recommended Carton Application

Key Features

  • White Top Ply for a Cleaner Packaging Appearance

The 40 g/m² white paper top ply gives the finished tape a brighter outer appearance than standard natural kraft reinforced tape.

  • Kraft Bottom Ply

A 35 g/m² kraft paper bottom ply forms part of the reinforced paper construction.

  • Fiberglass Reinforced Structure

The specified 72mm (1-1-1-1-1-1-1) fiberglass construction provides mechanical reinforcement for carton sealing and handling.

  • 238 N/25mm MD Tensile Strength

High machine-direction tensile performance supports the tape during dispensing, application, and transportation.

  • Water-Activated Starch Adhesive

The dry starch adhesive requires water activation before application to corrugated carton surfaces.

  • Recommended for Cartons Up to 30 kg

The technical sheet specifically recommends BJ-130E for lightweight to average cartons up to 30 kg.

Primary Uses

  • Corrugated Carton Sealing

Designed to securely close corrugated boxes using a single strip in suitable packaging applications.

  • Shipping Cartons Up to 30 kg

Recommended for lightweight to average cartons weighing up to approximately 30 kg under suitable packing conditions.

  • Warehouse & Distribution Packaging

Suitable for cartons moving through warehouse storage, order preparation, and distribution.

  • Transit Packaging

The reinforced backing helps support cartons exposed to routine transport and handling.

  • Tamper-Evident Carton Closure

The water-activated tape bonds to corrugated surfaces and can show visible evidence when the sealed area has been opened or disturbed.

Dongguan Baijin Packing Material Co., Ltd. Specializes In The Production Of Eco-Friendly Kraft Paper Tape. With 20 Years Of Experience, Our 12,000m² Facility Houses Over 100 Employees, Including A Dedicated Team Of Senior Technicians And Business Professionals.

We Operate Fully Integrated Production Lines—Covering Adhesive Manufacturing, Coating, Printing, And Slitting—To Ensure Strict Quality Control And Product Stability. Serving Both Domestic And Global Markets, We Are A Trusted Partner To Numerous Well-Known Brands.

Committed To Green Manufacturing, Our Products Hold Rohs, Reach (Svhc), Fsc, And Sgs Certifications, Guaranteeing Both Environmental Compliance And Superior Quality.

Factory Area
0 ㎡
Skilled Workers
0 +
Experienced Engineers
0 +
Processing Equipments
0 +
2561c444-af75-4d69-b2c8-669ce7c4ba1d

Welcome To Visit Our Factory

Certificates Obtained

Who We Cooperate With?

Frequently Asked Questions

BJ-130E is a white reinforced water-activated tape combining a 40 g/m² white top paper ply, 35 g/m² kraft bottom ply, fiberglass reinforcement, and starch adhesive for corrugated carton sealing.

White reinforced gummed paper tape provides a cleaner visible outer surface while retaining a reinforced paper construction underneath. It can be useful when both carton sealing strength and packaging appearance are important.

The technical specification lists 72mm (1-1-1-1-1-1-1) fiberglass reinforcement between the paper layers. This provides mechanical reinforcement to the tape structure.

BJ-130E is recommended for lightweight to average cartons up to 30 kg. Actual suitability should still be tested with the customer’s carton quality, tape width, sealing method, and transportation conditions.

The reinforced carton sealing tape has a specified machine-direction tensile strength of 238 N/25mm (53.5 lbs/in) and transverse-direction tensile strength of 114 N/25mm (25.6 lbs/in).

Yes. The fiberglass strengthens the paper structure, while the starch adhesive still requires water activation before the tape is applied to the corrugated carton.

Related Products